Document Reader AT9000 MK2

Document Reader AT9000 MK2

Document Reader AT9000 MK2 is a document reader device which can be used for reading documents, which is a handy tool for any facility that requires authentication, verification, or record maintenance of physical documents and scannable items.

 

It’s features includes, anti-glare screen, is able to work in multiple lighting conditions, and can even work without the cover.

 

It works on USB Power, can scan documents, IDs, Passports, Magnetic Stripes,RFID etc and it can perform major tasks including Optical Character Recognition, Barcode reading and RF identifying, and can read content with documents placed in varying directions and orientations.

Reading Capability

The Gemalto Document Reader AT9000 MK2 reads the following documents:

  • ePassport (RFID) Option Reads from and writes to contactless chips and eID
    according to:
    ISO 14443 13.56MHz Type-A and Type-B using a PC/SC interface
  • ePassport support for ICAO 9303 LDS 1.7 & 1.8 and PKI using included SDK
  • Dual antennas capable of reading shielded passports
  • iDL & eDL reading and access control for driving licenses to ISO 18013 parts 2&3 and ISO/CEI TR 19446 using included SDK
  • All standardized rates, up to 848 Kbps, read-out times depend on RFID tag, operating system and amount of data stored in the chip
  • PC/SC interface provides support to other card types such as Mifare™ (drivers for all supported OS)
  • SDK certified to BSI TR-03105 Parts 5.1 and 5.2
  • RFID reader optionally certified to BSI TR-03105 Part 4 Identity Document Verification Option Additional software can authenticate an identity document using optical pattern matching to:
  • Identify documents based on the type and country of origin Match security features captured from a document against a database of trusted security features including UV, IR, Visible and Gemalto Confirm™ laminate patterns
  • Check for presence of UV dull paper
  • Verify that areas are blank, devoid of patterns, text or printed matter
  • Check photo in chip against photo on data page Quality Assurance Option
  • Check photo in chip against photo on data page
  • Positional quality assurance (QA) – assures document is printed to applicable ISO, ICAO or customer standards
  • Measures skew, left margin, line spacing, character spacing, line length, print contrast, stroke width and distance from each character to the bottom of the
    document
    Gemalto Document Reader AT9000 MK2
  • ICAO compliant documents in near infrared (IR) per ICAO 9303 specification
    > One line Driving Licenses in near infrared (IR) per
    ISO18013 part 2 specification
  • 1D barcodes (2 of 5 interleaved, 2 of 5 industrial, Code 128, Code 39, UPC-A, EAN-8 and EAN-13)
  • 2D barcodes used on BCBP and other documents (PDF 417, QR Code®, DataMatrix™ and Aztec formats) from paper documents and many mobile devices

Quality Assurance Option

  • Check photo in chip against photo on data page
  • Positional quality assurance (QA) – assures document is printed to applicable ISO, ICAO or customer standards
  • Measures skew, left margin, line spacing, character spacing, line length, print contrast, stroke width and distance from each character to the bottom of the document

Illumination

The reader illuminates documents in multiple
wavelengths and lighting orientations:

  • Near IR B900, 880nm, +/-5%
  • White visible, 430-700nm
  • Ultraviolet (UVA): 365nm
  • Gemalto Confirm™ Security Laminate (optional)

Resolution

  • Standard 400 DPI image resolution, 3.1 Megapixel sensor
  • High Resolution 720 DPI option, 10 Megapixel sensor1
  • Internal image processing RGB 36 bit bit color system

Contact Smart Card Option

  • Supports ISO 7816 Class A and AB smart card
  • T=0, T=1 protocol support
  • Communication speed up to 344,105 bps (PPS, FI parameter)
  • Frequency up to 8 MHz (PPS, DI parameter)
  • 8 contacts – ISO location
  • Sliding contact

Status Indicators

The reader provides user feedback via the following status indicators:

  • Red – Read Error LED
  • Green – Valid Read LED
  • Yellow – Busy LED, progressing document
  • Blue – Ready LED The API provides for audible feedback via the computer speaker. The reader performs a power-up self-test and indicate failure using status LEDs.

Minimum PC Specification

Software must be installed on a customer-supplied PC, some aspects of the read speed may be affected by PC specification. The following minimum configuration is recommended:

  • 2 GHz Pentium® 4 CPU (Intel Core 2 Duo recommended)
  • 1 GB DRAM
  • USB 2.0
  • 60 MB of Hard Drive space for software
  • Windows® 7, Windows® 8.1 or Windows® 10 operating systems, 32 or 64 bit
  • Builds for Ubuntu and CentOS LTS, 32 & 64 bit 2
  • macOS (limited SDK functionality)

 

Security

  • Kensington® Security Lock
  • Recessed power switch on rear panel

Standard Dimensions

  • Length: 19.0 cm (7.5”)
  • Width: 16.2 cm (6.4”)
  • Height: 15.7 cm (6.2”) (with light shield)
  • Weight: < 1 kg or 2.2 lbs
  • Window size 125 x 88 mm

 

Dimensions with Smart Card Option

  • Length: 20.4 cm (8.0”)
  • Width: 16.2 cm (6.4”)
  • Height: 15.7 cm (6.2”)
  • Weight: < 1.1 Kg or 2.4 lbs

Regulatory

  • FCC Part 15 Class A
  • UL, UL-C
  • CB report
  • CE – RED, LVD & EMC
  • EU WEEE, REACH & RoHS Directives

Environment

  • Humidity: 20 to 95% (R.H. non-condensing)
  • Temperature: -10º to 50º C operating; -20º to 50º C  storage
  • IP50 rating for dust ingress protection in the optical chamber

Firmware Upgrade

  • Upgradeable firmware via USB 2.0 interface
  • Non-volatile memory for configuration and calibration accessed via USB 2.0 interface

Power

Powered from a single USB 2.0 port or via optional
universal input external power supply:

  • Power consumption: 5 volts DC, 500mA (when USB 2.0 powered)
  • External PSU:
  • Input voltage 100 – 240 VAC plus/minus 10%
  • Frequency 47 – 63 Hz
  • Detachable IEC320 AC mains power cable
  • Locking 3 pin connector

Service & Maintenance

  • One-year warranty
  • Annual maintenance agreement available
  • Each reader is supplied with one Micorfibre cleaning cloth

Also, it makes sure that the colors remain as original as possible, and is a really flexible product.